The Kizoku Techmod Kit is designed for MTL and restrictive DL vaping, which is composed of Kizoku Techmod 80W Mod and Kizoku Limit RTA tank. Kizoku Techmod uses 18650 batteries (not included) to provide up to 80 watts of power. The chipset reacts quickly, strong performance, the mod can be used in different modes, such as bypass mode, TC mode, VW(variable wattage) mode, and VV(variable voltage) mode. With the help of modern USB Type-C cable, it also supports 2A fast charging for battery. On the side control panel, familiar three-button operation, with OLED display. As for the Kizoku Limit MTL RTA, it is a small, simple MTL atomizer, perfect for Kizoku Techmod 80W mod, with a diameter of 22mm and a capacity of 3ml, you only need to fill it comfortably from above. Its 2-post design build deck allows you to easily build a single coil.
Technical Data: Size(Mod): 78 x 49 x24mm Diameter(Tank): 22mm E-juice Capacity: 3.0ml Battery: Single 18650 battery (Not Included) Output wattage: 80W max Work modes: Power (VW and VV), Bypass, TC Charging: 2A Fast Type-C Charge Fill: Top Fill Build deck: Two posts deck Coil build: Single coil build Airflow: Adjustable dual airflow
The VapX Geyser Pod System Kit is a true revolutionary device to touch the the top technology. Powered by a single 21700 battery, the VapX Geyser reaches a maximum output of 100W. The VapX Geyser is also compatible with 18650 cell (with a sleeve). The VapX Geyser 100W Pod Kit attaches two pods of 5ml 75W Air Pod and 6.5ml 45W Air Pod. The 5ml 75W Air Pod is best for Loose MTL/Loose DL vape while the 6.5ml 45W Air Pod is perfect for Tight MTL/Restricted DL vape. The buck-boost converter brings a real stale and consistent output to the VapX Geyser. The VapX Geyser Pod Kit adopts magnesium alloy construction for a lighter weight. So an external li-ion battery will not make the VapX Geyser heavy in palms. You can get from a Tight MTL vaping for harmonious lingering flavor to a loose DTL experience for a robust concentrated intense flavor.
Technical Data: Size: 87.7 x 30.9 x 53.5mm Material: Magnesium Alloy Pod Material: PC Power Range: 5-100W Capacity: 6.5ml/5ml Resistance Range: 0.1-3ohm Output Voltage: 0.5-8V Battery: 1 x 21700 /18650 (Not included, with a sleeve) Standard Coils: XCoil Model 10 / XCoil Model 15s Compatible Coils: Coils Of Model 10n/ Model 15d(sold separately)
Eleaf Pico Compaq is a newly designed pod mod device, which has a similar style to the Pico series but has some upgrades and innovations on the basis of the original. Powered by a single 18650 battery, the Eleaf Pico COMPAQ fires out a maximum output of 60W. Because of the reasonable design, Eleaf Pico COMPAQ will not look bulky and heavy even if the 18650 cell is installed. At the same time, Eleaf Pico COMPAQ has introduced a cover cap design, which makes the product not only dustproof but also protect the hygiene of drip tip. The cover cap and the device are connected by a chain to avoid getting lost. The Eleaf Pico COMPAQ uses mainstream Type-C charging port to speed up charging and shorten charging time. The replaceable GTL 0.4ohm mesh coil brings amazing flavor to the vapers too.
Technical Data: Size: 31.5mm x 53.5m x 89.0mm Capacity: 2ml/3.8ml Coil: GTL 0.4ohm KA1 Coil (20-30W) Resistance Range: 0.1-3.0ohm Battery: 1 x 18650 battery (Not included) Output: 1-60W